Inspiring Dental Excellence
TrueTooth #14
TrueTooth #14
TrueTooth #14
TrueTooth #14
TrueTooth #14
TrueTooth #14

TrueTooth #14

TrueTooth #14-001 has a large pulp chamber and canals.  The ovoid MB orifice bifurcates 1 mm below the orifice into MB1 and MB2 canals, each with a portal of exit.  The MB1 canal has an immature apex--perfect to practice MTA placement.  The MB2 canal is easily shaped and filled by conventional obturation methods, while the DB and P canals require careful apical gauging to confirm development of adequate apical resistance form.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
3 4 3
Root Curvature Moderate-Severe
Coronal Canal Curvature Slight
Apical Canal Curvature MB - Moderate-Severe
Pulp Chamber Size Large
Coronal Canal Size Large
Apical Canal Size Large
Terminal Diameter MB1 - 0.70 mm, MB2 - 0.25 mm, DB - 0.50 mm, P - 0.50 mm
Fins MB1 & MB2
Apical Branching MB1 & MB2 (Separate Portals of Exit)
Coronal Impediments None
Apical Impediments None

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
3 4 3
Root Curvature Moderate-Severe
Coronal Canal Curvature Slight
Apical Canal Curvature MB - Moderate-Severe
Pulp Chamber Size Large
Coronal Canal Size Large
Apical Canal Size Large
Terminal Diameter MB1 - 0.70 mm, MB2 - 0.25 mm, DB - 0.50 mm, P - 0.50 mm
Fins MB1 & MB2
Apical Branching MB1 & MB2 (Separate Portals of Exit)
Coronal Impediments None
Apical Impediments None


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.