Inspiring Dental Excellence
TrueTooth #19 (02)
TrueTooth #19 (02)
TrueTooth #19 (02)
TrueTooth #19 (02)
TrueTooth #19 (02)

TrueTooth #19 (02)

TrueTooth #19-002 has roots and canals with subtle curvature, but the mesial canal system is highly complex.  A third mesial canal bifurcates just under the ML orifice, rejoining the ML and MB just before exiting the root.  Between the larger ML orifice and the smaller MB orifice is another miniature orifice to a canal that heads apically for 1 mm, hooks 90 degrees, and then exits directly into the furcation.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
2 4 3
Root Curvature Slight
Coronal Canal Curvature Slight
Apical Canal Curvature Slight
Pulp Chamber Size Medium
Coronal Canal Size M - Small, D - Large
Apical Canal Size M - Small, D - Medium
Terminal Diameter MB2 - 0.12 mm, D - 0.28 mm
Fins Between 3 Mesial Canals
Lateral Canals 1 - Furcation
Coronal Branching Mesial - ML
Apical Confluence Mesial - MB, ML
Coronal Impediments Mesial - ML
Apical Impediments None

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
2 4 3
Root Curvature Slight
Coronal Canal Curvature Slight
Apical Canal Curvature Slight
Pulp Chamber Size Medium
Coronal Canal Size M - Small, D - Large
Apical Canal Size M - Small, D - Medium
Terminal Diameter MB2 - 0.12 mm, D - 0.28 mm
Fins Between 3 Mesial Canals
Lateral Canals 1 - Furcation
Coronal Branching Mesial - ML
Apical Confluence Mesial - MB, ML
Coronal Impediments Mesial - ML
Apical Impediments None


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.