Inspiring Dental Excellence
TrueTooth #29 (02)
TrueTooth #29 (02)
TrueTooth #29 (02)
TrueTooth #29 (02)
TrueTooth #29 (02)
TrueTooth #29 (02)

TrueTooth #29 (02)

TrueTooth #29-002 has three flutings that suggest the possibility of extra canals, but there are none.  The medium-sized pulp chamber is easily found during access; however, the canal is small and has multi-planer curvature that offers a slight challenge to negotiation, requiring file bending and effective direction of the bent file tip to reach this terminus.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
1 1 3
Root Curvature "S" Curve
Apical Canal Curvature Small
Pulp Chamber Size Medium
Coronal Canal Size Medium
Apical Canal Size Small
Terminal Diameter 0.33 mm
Fins Slight Buccal and Lingual
Apical Branching None
Coronal Impediments None
Apical Impediments None

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
1 1 3
Root Curvature "S" Curve
Apical Canal Curvature Small
Pulp Chamber Size Medium
Coronal Canal Size Medium
Apical Canal Size Small
Terminal Diameter 0.33 mm
Fins Slight Buccal and Lingual
Apical Branching None
Coronal Impediments None
Apical Impediments None


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.