Inspiring Dental Excellence
TrueTooth #31 (02)
TrueTooth #31 (02)
TrueTooth #31 (02)
TrueTooth #31 (02)
TrueTooth #31 (02)
TrueTooth #31 (02)

TrueTooth #31 (02)

TrueTooth #31-002 is the perfect TrueTooth to practice the basics because the pulp chamber and orifices are relatively large, and there are no impediments to frustrate negotiation.  All canals are under 20 mm's in length.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
2 3 2
Root Curvature ML - Moderate B, D - Moderate Mid-Root
Coronal Canal Curvature MB - Slight
Apical Canal Curvature Slight
Pulp Chamber Size Medium
Coronal Canal Size Large
Apical Canal Size Large
Terminal Diameter MB - 0.40 mm, ML - 0.40 mm, D - 0.50 mm
Fins M & D
Lateral Canals 1 Apically in the Distal
Coronal Branching None
Apical Branching M Root - Two Separate Apices

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

    Description

    No. of Roots No. of Canals Difficulty Factor
    2 3 2
    Root Curvature ML - Moderate B, D - Moderate Mid-Root
    Coronal Canal Curvature MB - Slight
    Apical Canal Curvature Slight
    Pulp Chamber Size Medium
    Coronal Canal Size Large
    Apical Canal Size Large
    Terminal Diameter MB - 0.40 mm, ML - 0.40 mm, D - 0.50 mm
    Fins M & D
    Lateral Canals 1 Apically in the Distal
    Coronal Branching None
    Apical Branching M Root - Two Separate Apices


    Instructions for Use 

    TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

    Access:

    • Use handpieces at 1,000 RPM with no torque limit.
    • Ultrasonics are not ideal, but work best when used wet.

    Negotiation:

    • Negotiate as normal using a lubricant.

    Shaping:

    • Use handpieces at normal RPM and torque settings.

    Irrigation:

    • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

    Obturation:

    • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
    • Carrier-based obturation: obturate as normal.

    Radiographs:

    • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

    Helpful Tip:

    • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.