Inspiring Dental Excellence
TrueTooth #31 - Accessed and Shaped
TrueTooth #31 - Accessed and Shaped

TrueTooth #31 - Accessed and Shaped

TrueTooth #31-001-AS has a mesial root with a significant cervical bend at the junction of the coronal and middle thirds, along with a slight mesial re-bend in the apical third.  The distal root is distally angled in relation to the crown, but the coronal file path into the distal canal is quite straight.  The canal within that root curves slightly to the distal in its apical half.  

TrueTooth #31-001-AS has been accessed and the canals have been fully shaped to a 40-.06 shape in the mesial canals and a 50-.08 shape in the distal.  Use this TrueTooth to practice obturation or post-endodontic restorative procedures.

Sold in a pack of 5.

 

+
No. of Roots No. of Canals Difficulty Factor
2 3 3
Root Curvature M - Moderate in the Coronal Third with Slight Reverse Apically, D - Slight
Coronal Canal Curvature M - Moderate
Apical Canal Curvature M - Moderate, D - Slight
Pulp Chamber Size Accessed
Canal Shapes M - 40-.06, D - 50-.08
Terminal Diameter M - 0.40 mm, D - 0.50 mm
Fins Isthmus Between M Canals
Lateral Canals None
Apical Confluence M in Apical Third

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
2 3 3
Root Curvature M - Moderate in the Coronal Third with Slight Reverse Apically, D - Slight
Coronal Canal Curvature M - Moderate
Apical Canal Curvature M - Moderate, D - Slight
Pulp Chamber Size Accessed
Canal Shapes M - 40-.06, D - 50-.08
Terminal Diameter M - 0.40 mm, D - 0.50 mm
Fins Isthmus Between M Canals
Lateral Canals None
Apical Confluence M in Apical Third


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.