Inspiring Dental Excellence
TrueTooth #9 - Accessed
TrueTooth #9 - Accessed

TrueTooth #9 - Accessed

TrueTooth #9-001-A is identical to TrueTooth #9-001, except that it comes with a pre-cut access cavity.  This TrueTooth is useful for teaching mental imaging and negotiation skills as the clinician can make several attempts at negotiating the apical accessory canal without the time-consuming distraction of cutting an access cavity each time. 

Sold in pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
1 1 2
Root Curvature Slight
Coronal Canal Curvature Slight
Apical Canal Curvature Slight
Pulp Chamber Size Accessed
Coronal Canal Size Small
Apical Canal Size Medium
Terminus Diameter 0.28 mm
Fins Buccal
Lateral Canals 1 (mid-root)
Apical Branching 1
Coronal Impediments Yes
Apical Impediments Yes

 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
1 1 2
Root Curvature Slight
Coronal Canal Curvature Slight
Apical Canal Curvature Slight
Pulp Chamber Size Accessed
Coronal Canal Size Small
Apical Canal Size Medium
Terminus Diameter 0.28 mm
Fins Buccal
Lateral Canals 1 (mid-root)
Apical Branching 1
Coronal Impediments Yes
Apical Impediments Yes

 

Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.