Inspiring Dental Excellence
TrueTooth #9 - Shaped Prosthodontic
TrueTooth #9 - Shaped Prosthodontic
TrueTooth #9 - Shaped Prosthodontic

TrueTooth #9 - Shaped Prosthodontic

TrueTooth #9-001-SP is designed to practice cutting a post space and making a custom post pattern by casting, finishing, and cementing the post/core assembly in preparation for the full crown to follow.  The coronal canal space is ovoid--the ideal indication for a canal post system.  The apical canal curvature may require slightly bent negotiating files.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
1 1 2
Root Curvature Very Slight
Apical Canal Curvature Moderate S Curve
Pulp Chamber Size Missing Above the CEJ, Partially Shaped Below the CEJ
Coronal Canal Size Cervical Third is Slightly Widened
Apical Canal Size Medium
Terminal Diameter .28 mm
Fins Buccal & Lingual
Lateral Canals 1 Lateral Canal, 1 Accessory Canal
Apical Branching Accessory Canal is 3 mm Short of Terminus
Apical Impediments Yes

 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

    Description

    No. of Roots No. of Canals Difficulty Factor
    1 1 2
    Root Curvature Very Slight
    Apical Canal Curvature Moderate S Curve
    Pulp Chamber Size Missing Above the CEJ, Partially Shaped Below the CEJ
    Coronal Canal Size Cervical Third is Slightly Widened
    Apical Canal Size Medium
    Terminal Diameter .28 mm
    Fins Buccal & Lingual
    Lateral Canals 1 Lateral Canal, 1 Accessory Canal
    Apical Branching Accessory Canal is 3 mm Short of Terminus
    Apical Impediments Yes

     

    Instructions for Use 

    TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

    Access:

    • Use handpieces at 1,000 RPM with no torque limit.
    • Ultrasonics are not ideal, but work best when used wet.

    Negotiation:

    • Negotiate as normal using a lubricant.

    Shaping:

    • Use handpieces at normal RPM and torque settings.

    Irrigation:

    • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

    Obturation:

    • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
    • Carrier-based obturation: obturate as normal.

    Radiographs:

    • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

    Helpful Tip:

    • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.