Inspiring Dental Excellence
TrueTooth #15
TrueTooth #15
TrueTooth #15
TrueTooth #15

TrueTooth #15

TrueTooth #15-001 has only three canals, but each feature a significant challenge.  The Palatal canal is relatively straight with a very large apical diameter of 4.5 mm.  The Single MB canal is ribbon-shaped with moderate curvature.  The DB canal is severely curved and progressively tightens.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
3 3 3
Root Curvature MB - Moderate, DB - Very Severe
Coronal Canal Curvature DB - Severe
Apical Canal Curvature DB - Very Severe
Pulp Chamber Size Large
Coronal Canal Size Large
Apical Canal Size MB - Medium, DB - Small, Palatal - Large
Terminal Diameter MB - 0.29 mm, DB - 0.2 mm, P - 0.45 mm
Fins None
Apical Branching None
Coronal Impediments DB
Apical Impediments DB

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
3 3 3
Root Curvature MB - Moderate, DB - Very Severe
Coronal Canal Curvature DB - Severe
Apical Canal Curvature DB - Very Severe
Pulp Chamber Size Large
Coronal Canal Size Large
Apical Canal Size MB - Medium, DB - Small, Palatal - Large
Terminal Diameter MB - 0.29 mm, DB - 0.2 mm, P - 0.45 mm
Fins None
Apical Branching None
Coronal Impediments DB
Apical Impediments DB


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.