Inspiring Dental Excellence
TrueTooth #18 (02)
TrueTooth #18 (02)
TrueTooth #18 (02)
TrueTooth #18 (02)
TrueTooth #18 (02)

TrueTooth #18 (02)

TrueTooth #18-002 has relatively large canals and very significant curvatures.  The mesial canals have swooping, severe curvature, joining to an exit of 0.18 mm.  The distal canal has a severe apical impediment and corkscrew bend 2 mm from the terminus.

Sold in a pack of 5.

+
No. of Roots No. of Canals Difficulty Factor
2 3 4
Root Curvature M - Severe, D - Slight
Coronal Canal Curvature M - Severe, D - Slight
Apical Canal Curvature M - Slight, D - Severe Bend
Pulp Chamber Size Medium
Coronal Canal Size Large
Apical Canal Size Small
Terminal Diameter M - 0.18 mm, D - 0.22 mm
Fins None
Apical Confluence MB, ML
Coronal Impediments None
Apical Impediments M - Slight, D - Very Severe

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.

Description

No. of Roots No. of Canals Difficulty Factor
2 3 4
Root Curvature M - Severe, D - Slight
Coronal Canal Curvature M - Severe, D - Slight
Apical Canal Curvature M - Slight, D - Severe Bend
Pulp Chamber Size Medium
Coronal Canal Size Large
Apical Canal Size Small
Terminal Diameter M - 0.18 mm, D - 0.22 mm
Fins None
Apical Confluence MB, ML
Coronal Impediments None
Apical Impediments M - Slight, D - Very Severe


Instructions for Use 

TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth.  TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA.  Special handling is necessary to realize the maximum benefits of using TrueTooth.

Access:

  • Use handpieces at 1,000 RPM with no torque limit.
  • Ultrasonics are not ideal, but work best when used wet.

Negotiation:

  • Negotiate as normal using a lubricant.

Shaping:

  • Use handpieces at normal RPM and torque settings.

Irrigation:

  • Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.

Obturation:

  • Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
  • Carrier-based obturation: obturate as normal.

Radiographs:

  • Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.

Helpful Tip:

  • Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.