TrueTooth #2
TrueTooth #2-001 is a great option for novice clinicians, as the roots and canals have little curvature and the canal system--from pulp horns to apical foramina--is large. Use this TrueTooth to practice apical management as the canals in this TrueTooth have a wide range of apical diameters--from 0.25 mm to .80 mm. With a terminus of 0.80 mm, the palatal canal is an excellent anatomic form for teaching MTA fills of large, open apex canals.
Sold in a pack of 5.
- Description
-
Instructions for Use
| No. of Roots | No. of Canals | Difficulty Factor |
| 3 | 3 | 2 |
| Root Curvature | Slight-Moderate |
| Coronal Canal Curvature | MB - Slight-Moderate, DB - Moderate-Severe |
| Apical Canal Curvature | MB - Moderate, DB - Slight "S" Curve, P - Very Slight |
| Pulp Chamber Size | Large |
| Coronal Canal Size | Large |
| Apical Canal Size | Large |
| Terminal Diameter | MB - 0.5 mm, DB - 0.25 mm, P - 0.8 mm |
| Fins | MB - Small Fin |
| Apical Branching | None |
| Coronal Impediments | None |
| Apical Impediments | None |
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Access:
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
Negotiation:
- Negotiate as normal using a lubricant.
Shaping:
- Use handpieces at normal RPM and torque settings.
Irrigation:
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
Obturation:
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
Radiographs:
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
Helpful Tip:
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.
Description
| No. of Roots | No. of Canals | Difficulty Factor |
| 3 | 3 | 2 |
| Root Curvature | Slight-Moderate |
| Coronal Canal Curvature | MB - Slight-Moderate, DB - Moderate-Severe |
| Apical Canal Curvature | MB - Moderate, DB - Slight "S" Curve, P - Very Slight |
| Pulp Chamber Size | Large |
| Coronal Canal Size | Large |
| Apical Canal Size | Large |
| Terminal Diameter | MB - 0.5 mm, DB - 0.25 mm, P - 0.8 mm |
| Fins | MB - Small Fin |
| Apical Branching | None |
| Coronal Impediments | None |
| Apical Impediments | None |
Instructions for Use
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Access:
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
Negotiation:
- Negotiate as normal using a lubricant.
Shaping:
- Use handpieces at normal RPM and torque settings.
Irrigation:
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
Obturation:
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
Radiographs:
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
Helpful Tip:
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.
