TrueTooth #5-001 is a simple, two-rooted maxillary premolar. The pulp chamber exceeds 1.5 mm coronal to the CEJ; the buccal pulp horn is 3 mm under the occlusal surface while the lingual horn is 5 mm away.
Sold in a pack of 5.
|No. of Roots||No. of Canals||Difficulty Factor|
|Coronal Canal Curvature||Slight|
|Pulp Chamber Size||Large|
|Coronal Canal Size||Medium|
|Apical Canal Size||Small|
|Terminal Diameter||Buccal - .15 mm, Lingual - .28 mm|
Instructions for Use
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
- Negotiate as normal using a lubricant.
- Use handpieces at normal RPM and torque settings.
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.