TrueTooth #9
TrueTooth #9-001 ("Instructor's Choice") has a mid-root lateral canal and large sweeping accessory canal in the apical third. This TrueTooth poses a moderate challenge during the access procedure because the majority of the pulp chamber is calcified, receding to the CEJ.
Sold in a pack of 5.
- Description
- Instructions for Use
No. of Roots | No. of Canals | Difficulty Factor |
1 | 1 | 3 |
Root Curvature | Slight |
Coronal Canal Curvature | Slight |
Apical Canal Curvature | Slight |
Pulp Chamber Size | Small |
Coronal Canal Size | Small |
Apical Canal Size | Medium |
Terminal Diameter | 0.28 mm |
Fins | Buccal |
Lateral Canals | 1 (mid-root) |
Apical Branching | 1 |
Coronal Impediments | Yes |
Apical Impediments | Yes |
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Access:
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
Negotiation:
- Negotiate as normal using a lubricant.
Shaping:
- Use handpieces at normal RPM and torque settings.
Irrigation:
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
Obturation:
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
Radiographs:
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
Helpful Tip:
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.
Description
No. of Roots | No. of Canals | Difficulty Factor |
1 | 1 | 3 |
Root Curvature | Slight |
Coronal Canal Curvature | Slight |
Apical Canal Curvature | Slight |
Pulp Chamber Size | Small |
Coronal Canal Size | Small |
Apical Canal Size | Medium |
Terminal Diameter | 0.28 mm |
Fins | Buccal |
Lateral Canals | 1 (mid-root) |
Apical Branching | 1 |
Coronal Impediments | Yes |
Apical Impediments | Yes |
Instructions for Use
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Access:
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
Negotiation:
- Negotiate as normal using a lubricant.
Shaping:
- Use handpieces at normal RPM and torque settings.
Irrigation:
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
Obturation:
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
Radiographs:
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
Helpful Tip:
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.